Omron E3T-ST11
Rated 3.5/5 based on 11 customer reviews

Omron E3T-ST11

  • Category: PLC
$64.84
Image
Shape Square type
Sensing method Through-beam type
Sensing distance 1 m max.
Standard sensing object Opaque: 2 mm dia. min.
Minimum sensing object 2 mm min. dia. (Opaque)
Directional angle 2 to 20 °
Light source Red LED (650 nm)
Power supply voltage 12 to 24 VDC ±10% ripple (p-p) 10% max.
Current consumption Emitter: 10 mA max.
Receiver: 20 mA max.
Control output NPN open collector
26.4 VDC max.
Load current: 50 mA max.
Residual voltage: 1 V max. (Load current Less than 10 mA), 2 V max. (Load current 10 to 50 mA)
Operation mode Light-ON
Protective circuit Output short-cut protection, Output reverse polarity protection, Power supply reverse polarity protection
Response time 1 ms max.(Operate or reset)
Ambient illuminance Incandescent lamp: 5000 lux max., Sunlight: 10000 lux max.
Ambient temperature Operating: -25 to 55℃
Storage: -40 to 70℃
Ambient humidity Operating: 35 to 85%
Storage: 35 to 95%
Insulation resistance 20 MΩ min. (at 500 VDC)
Dielectric strength 1000 VAC 50/60 Hz 1 min
Vibration resistance Destruction: 10 to 2000 Hz, 1.5-mm or 300 m/s**2 double amplitude for 0.5 hours each in X, Y, and Z directions
Shock resistance Destruction: 1000 m/s**2 3 times each in X, Y and Z directions
Degree of protection IEC: IP67
Connection method Pre-wired models (Cable length: 2 m
Indicator Operation indicator (orange), Stability indicator (green)
Weight Package: Approx. 40 g
Accessories Instruction manual, Set screws for mounting (M2*14), Nuts
Material Case: Polybutylene terephthalate (PBT)
Lens: Denatured Polyarylate
Display: Denatured Polyarylate
Shape Square type
Sensing method Through-beam type
Sensing distance 1 m max.
Standard sensing object Opaque: 2 mm dia. min.
Minimum sensing object 2 mm min. dia. (Opaque)
Directional angle 2 to 20 °
Light source Red LED (650 nm)
Power supply voltage 12 to 24 VDC ±10% ripple (p-p) 10% max.
Current consumption Emitter: 10 mA max.
Receiver: 20 mA max.
Control output NPN open collector
26.4 VDC max.
Load current: 50 mA max.
Residual voltage: 1 V max. (Load current Less than 10 mA), 2 V max. (Load current 10 to 50 mA)
Operation mode Light-ON
Protective circuit Output short-cut protection, Output reverse polarity protection, Power supply reverse polarity protection
Response time 1 ms max.(Operate or reset)
Ambient illuminance Incandescent lamp: 5000 lux max., Sunlight: 10000 lux max.
Ambient temperature Operating: -25 to 55℃
Storage: -40 to 70℃
Ambient humidity Operating: 35 to 85%
Storage: 35 to 95%
Insulation resistance 20 MΩ min. (at 500 VDC)
Dielectric strength 1000 VAC 50/60 Hz 1 min
Vibration resistance Destruction: 10 to 2000 Hz, 1.5-mm or 300 m/s**2 double amplitude for 0.5 hours each in X, Y, and Z directions
Shock resistance Destruction: 1000 m/s**2 3 times each in X, Y and Z directions
Degree of protection IEC: IP67
Connection method Pre-wired models (Cable length: 2 m
Indicator Operation indicator (orange), Stability indicator (green)
Weight Package: Approx. 40 g
Accessories Instruction manual, Set screws for mounting (M2*14), Nuts
Material Case: Polybutylene terephthalate (PBT)
Lens: Denatured Polyarylate
Display: Denatured Polyarylate