Omron E3T-FT12
| Shape | Rectangular type (Flat) |
|---|---|
| Sensing method | Through-beam type |
| Sensing distance | 500 mm max. |
| Standard sensing object | Opaque: 1.3 mm dia. min. |
| Minimum sensing object | 1.3 mm min. dia. (Opaque) |
| Directional angle | 3 to 25 ° |
| Light source | Red LED (650 nm) |
| Power supply voltage | 12 to 24 VDC ±10% ripple (p-p) 10% max. |
| Current consumption | Emitter: 10 mA max. Receiver: 20 mA max. |
| Control output | NPN open collector 26.4 VDC max. Load current: 50 mA max. Residual voltage: 1 V max. (Load current Less than 10 mA), 2 V max. (Load current 10 to 50 mA) |
| Operation mode | Dark-ON |
| Protective circuit | Output short-cut protection, Output reverse polarity protection, Power supply reverse polarity protection |
| Response time | 1 ms max.(Operate or reset) |
| Ambient illuminance | Incandescent lamp: 5000 lux max., Sunlight: 10000 lux max. |
| Ambient temperature | Operating: -25 to 55℃ Storage: -40 to 70℃ |
| Ambient humidity | Operating: 35 to 85% Storage: 35 to 95% |
| Insulation resistance | 20 MΩ min. (at 500 VDC) |
| Dielectric strength | 1000 VAC 50/60 Hz 1 min |
| Vibration resistance | Destruction: 10 to 2000 Hz, 1.5-mm or 300 m/s**2 double amplitude for 0.5 hours each in X, Y, and Z directions |
| Shock resistance | Destruction: 1000 m/s**2 3 times each in X, Y and Z directions |
| Degree of protection | IEC: IP67 |
| Connection method | Pre-wired models (Cable length: 2 m |
| Indicator | Operation indicator (orange), Stability indicator (green) |
| Weight | Package: Approx. 40 g |
| Accessories | Instruction manual, Set screws for mounting (M2*8), Nuts |
| Material | Case: Polybutylene terephthalate (PBT) Lens: Denatured Polyarylate Display: Denatured Polyarylate |
| Shape | Rectangular type (Flat) |
|---|---|
| Sensing method | Through-beam type |
| Sensing distance | 500 mm max. |
| Standard sensing object | Opaque: 1.3 mm dia. min. |
| Minimum sensing object | 1.3 mm min. dia. (Opaque) |
| Directional angle | 3 to 25 ° |
| Light source | Red LED (650 nm) |
| Power supply voltage | 12 to 24 VDC ±10% ripple (p-p) 10% max. |
| Current consumption | Emitter: 10 mA max. Receiver: 20 mA max. |
| Control output | NPN open collector 26.4 VDC max. Load current: 50 mA max. Residual voltage: 1 V max. (Load current Less than 10 mA), 2 V max. (Load current 10 to 50 mA) |
| Operation mode | Dark-ON |
| Protective circuit | Output short-cut protection, Output reverse polarity protection, Power supply reverse polarity protection |
| Response time | 1 ms max.(Operate or reset) |
| Ambient illuminance | Incandescent lamp: 5000 lux max., Sunlight: 10000 lux max. |
| Ambient temperature | Operating: -25 to 55℃ Storage: -40 to 70℃ |
| Ambient humidity | Operating: 35 to 85% Storage: 35 to 95% |
| Insulation resistance | 20 MΩ min. (at 500 VDC) |
| Dielectric strength | 1000 VAC 50/60 Hz 1 min |
| Vibration resistance | Destruction: 10 to 2000 Hz, 1.5-mm or 300 m/s**2 double amplitude for 0.5 hours each in X, Y, and Z directions |
| Shock resistance | Destruction: 1000 m/s**2 3 times each in X, Y and Z directions |
| Degree of protection | IEC: IP67 |
| Connection method | Pre-wired models (Cable length: 2 m |
| Indicator | Operation indicator (orange), Stability indicator (green) |
| Weight | Package: Approx. 40 g |
| Accessories | Instruction manual, Set screws for mounting (M2*8), Nuts |
| Material | Case: Polybutylene terephthalate (PBT) Lens: Denatured Polyarylate Display: Denatured Polyarylate |
Related items
$235.00
