DrägerTube Naturalgas-Odor (10) - PN: 8103071
Rated 3.5/5 based on 11 customer reviews

DrägerTube Naturalgas-Odor (10) - PN: 8103071

$174.00
Image

DrägerTube Naturalgas-Odor (10)
PN: 8103071

Dräger-Tubes™ are used together with a Dräger tube pump for measurements of gases, vapors and aerosols, usually in air, and are one of the classic methods of gas analysis. This Dräger-Tube is used for the detection of natural gas odrification and has the following standard measuring range: 1-10 mg/m³ Measurements: 10



Application Range
Standard Measuring Range 3 to 15 mg/m3   /   1 to 10 mg/m3
Number of Strokes n 3                          /   5
Time for Measurement 3 min                   /   5 min
Standard Deviation ± 15 to 20%
Color Change yellow to pink
Ambient Operating Conditions
Temperature
20 to 35 °C
Absolute Humidity <15 mg H2O/L 
 Cross Sensitivity
Hydrogen sulfide, sulfur dioxide, mercaptane, arsine, nitrogen dioxide and phosphine are  indicated as well, but with different sensitivities
Additional Information 
For applications in an environment with temperature below 20°C use temperature correction.  To do so refer to the instructions for use.

DrägerTube Naturalgas-Odor (10)
PN: 8103071

Dräger-Tubes™ are used together with a Dräger tube pump for measurements of gases, vapors and aerosols, usually in air, and are one of the classic methods of gas analysis. This Dräger-Tube is used for the detection of natural gas odrification and has the following standard measuring range: 1-10 mg/m³ Measurements: 10



Application Range
Standard Measuring Range 3 to 15 mg/m3   /   1 to 10 mg/m3
Number of Strokes n 3                          /   5
Time for Measurement 3 min                   /   5 min
Standard Deviation ± 15 to 20%
Color Change yellow to pink
Ambient Operating Conditions
Temperature
20 to 35 °C
Absolute Humidity <15 mg H2O/L 
 Cross Sensitivity
Hydrogen sulfide, sulfur dioxide, mercaptane, arsine, nitrogen dioxide and phosphine are  indicated as well, but with different sensitivities
Additional Information 
For applications in an environment with temperature below 20°C use temperature correction.  To do so refer to the instructions for use.