Dräger Tube Tetrahydrothiophene 1/b - PN: 8101341
Dräger Tube Tetrahydrothiophene 1/b
PN: 8101341
Dräger-Tubes™ are used together with a Dräger tube pump for measurements of gases, vapors and aerosols, usually in air, and are one of the classic methods of gas analysis. This Dräger-Tube is used for the detection of tetrahydrothiophene and has the following standard measuring range: 1-10 ppm Measurements: 5
Application Range
Standard Measuring Range: 1 to 10 ppm / 4 to 40 mg/m3
Number of Strokes n: 30
Time for Measurement: in air: approx. 15 min in natural gas: approx. 10 min
Standard Deviation: ± 15 to 20 %
Color Change: violet ä yellow brown
Ambient Operating Conditions
Temperature: 0 to 35 °C
Absolute Humidity: < 30 mg H2O / L
Reaction Principle
THT + KMnO4 ä yellow brown reaction product
Cross Sensitivity
Up to 10 ppm hydrogen sulfide is adsorbed in the pretube, causing a brown discoloration. It is impossible to measure tetrahydrothiophene in the presence of mercaptans. Up to 100 ppm of olefines (e. g. ethene, propene) will cause the color of the indicating layer to become lighter, at higher concentrations the olefins are also indicated. Up to 200 ppm methanol does not interfere.
Extension of Measuring Range
1.6 to 16 ppm / 6.4 to 64 mg/m3
n = 20 multiply the reading by 1.6
Dräger Tube Tetrahydrothiophene 1/b
PN: 8101341
Dräger-Tubes™ are used together with a Dräger tube pump for measurements of gases, vapors and aerosols, usually in air, and are one of the classic methods of gas analysis. This Dräger-Tube is used for the detection of tetrahydrothiophene and has the following standard measuring range: 1-10 ppm Measurements: 5
Application Range
Standard Measuring Range: 1 to 10 ppm / 4 to 40 mg/m3
Number of Strokes n: 30
Time for Measurement: in air: approx. 15 min in natural gas: approx. 10 min
Standard Deviation: ± 15 to 20 %
Color Change: violet ä yellow brown
Ambient Operating Conditions
Temperature: 0 to 35 °C
Absolute Humidity: < 30 mg H2O / L
Reaction Principle
THT + KMnO4 ä yellow brown reaction product
Cross Sensitivity
Up to 10 ppm hydrogen sulfide is adsorbed in the pretube, causing a brown discoloration. It is impossible to measure tetrahydrothiophene in the presence of mercaptans. Up to 100 ppm of olefines (e. g. ethene, propene) will cause the color of the indicating layer to become lighter, at higher concentrations the olefins are also indicated. Up to 200 ppm methanol does not interfere.
Extension of Measuring Range
1.6 to 16 ppm / 6.4 to 64 mg/m3
n = 20 multiply the reading by 1.6
