Dräger Tube Phosphine 0.1/c - PN: 8103711
Dräger Tube Phosphine 0.1/c - PN: 8103711
$111.00
Dräger Tube Phosphine 0,1/c (10)
PN: 8103711
Dräger-Tubes™ are used together with a Dräger tube pump for measurements of gases, vapors and aerosols, usually in air, and are one of the classic methods of gas analysis. This Dräger-Tube is used for the detection of phosphine and has the following standard measuring ranges: 0.5-3 ppm 0.1-1.0 ppm Measurements: 10
| Application Range | |
| Standard Measuring Range | 0.5 to 3 ppm / 0.1 to 1.0 ppm |
| Number of Strokes n | 1 / 3 |
| Time for Measurement | approx. 1 min / approx. 2.5 min |
| Standard Deviation | ± 10 to 15% |
| Color Change | yellow to red |
| Ambient Operating Conditions | |
| Temperature |
2 to 40 °C |
| Absolute Humidity | <40 mg H2O/L |
| Cross Sensitivity |
| A maximum of 6 ppm sulphur dioxide or 15 ppm hydrogen chloride have no influence on the reasing. Higher concentration result in plus errors. Ammonia (>100 ppm) result in minus errors. Hyrogen sulphide and Arsine are indicated with different sensitivity. 30 ppm hydrocyanic acid does not affect. |
Dräger Tube Phosphine 0,1/c (10)
PN: 8103711
Dräger-Tubes™ are used together with a Dräger tube pump for measurements of gases, vapors and aerosols, usually in air, and are one of the classic methods of gas analysis. This Dräger-Tube is used for the detection of phosphine and has the following standard measuring ranges: 0.5-3 ppm 0.1-1.0 ppm Measurements: 10
| Application Range | |
| Standard Measuring Range | 0.5 to 3 ppm / 0.1 to 1.0 ppm |
| Number of Strokes n | 1 / 3 |
| Time for Measurement | approx. 1 min / approx. 2.5 min |
| Standard Deviation | ± 10 to 15% |
| Color Change | yellow to red |
| Ambient Operating Conditions | |
| Temperature |
2 to 40 °C |
| Absolute Humidity | <40 mg H2O/L |
| Cross Sensitivity |
| A maximum of 6 ppm sulphur dioxide or 15 ppm hydrogen chloride have no influence on the reasing. Higher concentration result in plus errors. Ammonia (>100 ppm) result in minus errors. Hyrogen sulphide and Arsine are indicated with different sensitivity. 30 ppm hydrocyanic acid does not affect. |
