Dräger MT Benzene 1-150 ppb - PN 8610600
Dräger MT Benzene 1-150 ppb
PN : 8610600
|
Measuring Range |
1 to 150 ppb (only in conjunction with tube ppb booster basic 37 02 013) |
| Typical Measuring Time |
approx. 100 to 900 s |
| Accuracy | ± 25% ( under calibration conditions ) |
|
Ambient Conditions |
|
| Temperature |
0 to 40 °C |
| Temperature correction |
20to 30 C° to none < 20°C to 3% from measured value per °C |
| Humidity |
1 to 30 mg/L |
|
Cross Sensitivity |
No influence at 25 ppb benzene by: 20 ppm octan 130 toluene 150 ppb xylene |
| Hose and probe measurement |
The following flushing time recommendations for hose and probe measurements are marked with a brand-new, dry and clean hose and probes. |
| Hose |
Length (meter) |
Flashing time (min) |
| FKM hose |
5-20 |
3 |
| FKM hose |
45 |
5 |
| PTFE-lined PVS hose |
3-15 | 5 |
| Bar probe 90 (8316532) |
2 | |
| Telescopic probe ES 150 (83 16 533) |
1 | |
| Probe Set GP600 (83 28 667) |
2 |
|
Dräger MT Benzene 1-150 ppb
PN : 8610600
|
Measuring Range |
1 to 150 ppb (only in conjunction with tube ppb booster basic 37 02 013) |
| Typical Measuring Time |
approx. 100 to 900 s |
| Accuracy | ± 25% ( under calibration conditions ) |
|
Ambient Conditions |
|
| Temperature |
0 to 40 °C |
| Temperature correction |
20to 30 C° to none < 20°C to 3% from measured value per °C |
| Humidity |
1 to 30 mg/L |
|
Cross Sensitivity |
No influence at 25 ppb benzene by: 20 ppm octan 130 toluene 150 ppb xylene |
| Hose and probe measurement |
The following flushing time recommendations for hose and probe measurements are marked with a brand-new, dry and clean hose and probes. |
| Hose |
Length (meter) |
Flashing time (min) |
| FKM hose |
5-20 |
3 |
| FKM hose |
45 |
5 |
| PTFE-lined PVS hose |
3-15 | 5 |
| Bar probe 90 (8316532) |
2 | |
| Telescopic probe ES 150 (83 16 533) |
1 | |
| Probe Set GP600 (83 28 667) |
2 |
|
