Draeger MT MTBE 2-200 ppm - PN : 8610530
Draeger MT MTBE 2-200 ppm
PN : 8610530
|
Measuring Range |
2 to 200 |
| Typical Measuring Time |
60 to 450 s |
| Accuracy | ± 25% ( under calibration conditions ) |
|
Ambient Conditions |
|
| Temperature |
10 to 30 °C |
| Temperature Correction | <20°C : +12% from measured value per °C >20°C : -5% from measured value per °C |
| Humidity |
1 to 30 mg/L |
|
Cross Sensitivity |
No influence at 50 ppm MTBE by: 150 ppm benzene 5 ppm toluene 10 ppm ethyl benzene 2 ppm xylene 100 ppm cyclohexane |
| Hose and probe measurement |
The following flushing time recommendations for hose and probe measurements are marked with a brand-new, dry and clean hose and probes. |
| Hose |
Length (meter) |
Flashing time (min) |
| FKM hose |
5-20 |
3 |
| FKM hose |
45 |
5 |
| PTFE-lined PVS hose |
3-15 | 3 |
| Bar probe 90 (8316532) |
2 | |
| Telescopic probe ES 150 (83 16 533) |
2 | |
| Probe Set GP600 (83 28 667) |
2 |
|
Draeger MT MTBE 2-200 ppm
PN : 8610530
|
Measuring Range |
2 to 200 |
| Typical Measuring Time |
60 to 450 s |
| Accuracy | ± 25% ( under calibration conditions ) |
|
Ambient Conditions |
|
| Temperature |
10 to 30 °C |
| Temperature Correction | <20°C : +12% from measured value per °C >20°C : -5% from measured value per °C |
| Humidity |
1 to 30 mg/L |
|
Cross Sensitivity |
No influence at 50 ppm MTBE by: 150 ppm benzene 5 ppm toluene 10 ppm ethyl benzene 2 ppm xylene 100 ppm cyclohexane |
| Hose and probe measurement |
The following flushing time recommendations for hose and probe measurements are marked with a brand-new, dry and clean hose and probes. |
| Hose |
Length (meter) |
Flashing time (min) |
| FKM hose |
5-20 |
3 |
| FKM hose |
45 |
5 |
| PTFE-lined PVS hose |
3-15 | 3 |
| Bar probe 90 (8316532) |
2 | |
| Telescopic probe ES 150 (83 16 533) |
2 | |
| Probe Set GP600 (83 28 667) |
2 |
|
