Dräger-Tube Hydrogen Sulfide + Sulfur Dioxide 0.2%/A - PN: CH28201
Dräger-Tube Hydrogen Sulfide + Sulfur Dioxide 0.2%/A (10)
PN: CH28201
Dräger-Tubes™ are used together with a Dräger tube pump for measurements of gases, vapors and aerosols, usually in air, and are one of the classic methods of gas analysis. This Dräger-Tube is used for the detection of sulfur dioxide + hydrogen sulfide and has the following standard measuring range: 0.02-7 Vol% Measurements: 10
| Application Range | |
| Standard Measuring Range | 0.2 to 7 vol. % |
| Number of Strokes n | 1+2 desorption strokes in clean air |
| Time for Measurement | approx. 2 min |
| Standard Deviation | ± 5 to 10% |
| Color Change | brown to bright yellow |
| Ambient Operating Conditions | |
| Temperature |
0 to 40 °C |
| Absolute Humidity | max. 40 mg H2O/L |
| Cross Sensitivity |
| All substances oxidized by iodine are indicated, but with different sensitivities. It is impossible to measure hydrogen sulfide and sulfur dioxide in the presence of such substances. |
|
Extension of the Measuring Range |
| Using n=10, divide the reading by 10; the measuring range will be 0.02 to 0.7 vol.% |
Dräger-Tube Hydrogen Sulfide + Sulfur Dioxide 0.2%/A (10)
PN: CH28201
Dräger-Tubes™ are used together with a Dräger tube pump for measurements of gases, vapors and aerosols, usually in air, and are one of the classic methods of gas analysis. This Dräger-Tube is used for the detection of sulfur dioxide + hydrogen sulfide and has the following standard measuring range: 0.02-7 Vol% Measurements: 10
| Application Range | |
| Standard Measuring Range | 0.2 to 7 vol. % |
| Number of Strokes n | 1+2 desorption strokes in clean air |
| Time for Measurement | approx. 2 min |
| Standard Deviation | ± 5 to 10% |
| Color Change | brown to bright yellow |
| Ambient Operating Conditions | |
| Temperature |
0 to 40 °C |
| Absolute Humidity | max. 40 mg H2O/L |
| Cross Sensitivity |
| All substances oxidized by iodine are indicated, but with different sensitivities. It is impossible to measure hydrogen sulfide and sulfur dioxide in the presence of such substances. |
|
Extension of the Measuring Range |
| Using n=10, divide the reading by 10; the measuring range will be 0.02 to 0.7 vol.% |
