Firetrol battery charger AS-2001 or LL-1580.
POWFIR0001
Brand new and Original.
Instruction :
When installing the battery charger as a replacement part, it is necessary to verify the proper charger settings and adjust as necessary.
1. Incoming AC voltage 115 or 230 volts.
2. Battery voltage - 12 or 24 volts DC.
3. Battery type - Lead Acid/Ni-Cad or 18 Cell / Ni-Cad 10 or 20 Cell.
If battery charger is powered with incorrect settings, damage to the charger and/or batteries may occur.
The Firetrol Battery charge feature a fully automatic 4 Step charging cycle. The charging cycle are as indicate :
Step 1 : Qualification stage (Flashing yellow and green LED). During this stage, the battery charger checks the batteries to insure they can accept a fast charge. It also checks for missing or defective batteries. If the charger detect missing or defective batteries a fault will given (solid red LED).
Step 2 : Fast Charge (solid yellow LED). Charges the batteries until they reach peak voltage.
Step 3 : Bulk Charge (Solid yellow LED and slow blinking green LED). Charges the batteries at a constant potential of peak voltage until current reaches 500mA.
Step 4 : Float charge (Solid Green LED). Trickle charges the batteries to maintain peak potential.
The battery charger also includes the following :
- Selectable AC power voltage ( 115 or 230 V )
- Selectable battery voltage ( 2 or 24 V )
- Selectable battery type ( Lead acid, NiCad 9 or 18 cell, NiCad 10 or 20 cell )
- AC power fuse ( Type 3AG, 6A,250V )
- DC power fuse ( Type 3AB, 20A, 250V )
- Charger reset push - button (resets charging cycle to beginning )
Firetrol battery charger AS-2001 or LL-1580.
POWFIR0001
Brand new and Original.
Instruction :
When installing the battery charger as a replacement part, it is necessary to verify the proper charger settings and adjust as necessary.
1. Incoming AC voltage 115 or 230 volts.
2. Battery voltage - 12 or 24 volts DC.
3. Battery type - Lead Acid/Ni-Cad or 18 Cell / Ni-Cad 10 or 20 Cell.
If battery charger is powered with incorrect settings, damage to the charger and/or batteries may occur.
The Firetrol Battery charge feature a fully automatic 4 Step charging cycle. The charging cycle are as indicate :
Step 1 : Qualification stage (Flashing yellow and green LED). During this stage, the battery charger checks the batteries to insure they can accept a fast charge. It also checks for missing or defective batteries. If the charger detect missing or defective batteries a fault will given (solid red LED).
Step 2 : Fast Charge (solid yellow LED). Charges the batteries until they reach peak voltage.
Step 3 : Bulk Charge (Solid yellow LED and slow blinking green LED). Charges the batteries at a constant potential of peak voltage until current reaches 500mA.
Step 4 : Float charge (Solid Green LED). Trickle charges the batteries to maintain peak potential.
The battery charger also includes the following :
- Selectable AC power voltage ( 115 or 230 V )
- Selectable battery voltage ( 2 or 24 V )
- Selectable battery type ( Lead acid, NiCad 9 or 18 cell, NiCad 10 or 20 cell )
- AC power fuse ( Type 3AG, 6A,250V )
- DC power fuse ( Type 3AB, 20A, 250V )
- Charger reset push - button (resets charging cycle to beginning )
